From 153dccd467b818b1dd3a6801b14e94a7a48ef859 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Mon, 4 Jun 2012 16:28:47 +0530 Subject: [PATCH 24/57] ath9k_hw: fix power state for MCI Program MCI related power registers only if MCI interrupts are enabled. This could help to reduce power consumptions when WLAN alone is enabled in BT coex chips. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2021,12 +2021,9 @@ static void ath9k_set_power_sleep(struct REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV); if (AR_SREV_9462(ah)) { - REG_WRITE(ah, AR_TIMER_MODE, - REG_READ(ah, AR_TIMER_MODE) & 0xFFFFFF00); - REG_WRITE(ah, AR_NDP2_TIMER_MODE, - REG_READ(ah, AR_NDP2_TIMER_MODE) & 0xFFFFFF00); - REG_WRITE(ah, AR_SLP32_INC, - REG_READ(ah, AR_SLP32_INC) & 0xFFF00000); + REG_CLR_BIT(ah, AR_TIMER_MODE, 0xff); + REG_CLR_BIT(ah, AR_NDP2_TIMER_MODE, 0xff); + REG_CLR_BIT(ah, AR_SLP32_INC, 0xfffff); /* xxx Required for WLAN only case ? */ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN, 0); udelay(100); @@ -2038,7 +2035,7 @@ static void ath9k_set_power_sleep(struct */ REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN); - if (AR_SREV_9462(ah)) + if (ath9k_hw_mci_is_enabled(ah)) udelay(100); if (!AR_SREV_9100(ah) && !AR_SREV_9300_20_OR_LATER(ah)) @@ -2063,7 +2060,6 @@ static void ath9k_set_power_sleep(struct static void ath9k_set_power_network_sleep(struct ath_hw *ah) { struct ath9k_hw_capabilities *pCap = &ah->caps; - u32 val; REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV); @@ -2082,19 +2078,16 @@ static void ath9k_set_power_network_slee * SYS_WAKING and SYS_SLEEPING messages which will make * BT CPU to busy to process. */ - if (AR_SREV_9462(ah)) { - val = REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_EN) & - ~AR_MCI_INTERRUPT_RX_HW_MSG_MASK; - REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN, val); - } + if (ath9k_hw_mci_is_enabled(ah)) + REG_CLR_BIT(ah, AR_MCI_INTERRUPT_RX_MSG_EN, + AR_MCI_INTERRUPT_RX_HW_MSG_MASK); /* * Clear the RTC force wake bit to allow the * mac to go to sleep. */ - REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE, - AR_RTC_FORCE_WAKE_EN); + REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN); - if (AR_SREV_9462(ah)) + if (ath9k_hw_mci_is_enabled(ah)) udelay(30); }