From f58070226054fe12876b25d6662ac108e7f4f8b3 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 7 Sep 2012 12:15:15 +0530 Subject: [PATCH 230/231] ath9k_hw: Read and apply thermometer settings from EEPROM Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 39 ++++++++++++++++++++++++++ drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 ++ 2 files changed, 41 insertions(+) --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -3949,6 +3949,44 @@ static void ar9003_hw_txend_to_xpa_off_a AR_PHY_XPA_TIMING_CTL_TX_END_XPAA_OFF, value); } +static int ar9003_hw_get_thermometer(struct ath_hw *ah) +{ + struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; + struct ar9300_base_eep_hdr *pBase = &eep->baseEepHeader; + int thermometer = (pBase->miscConfiguration >> 1) & 0x3; + + return --thermometer; +} + +static void ar9003_hw_thermometer_apply(struct ath_hw *ah) +{ + int thermometer = ar9003_hw_get_thermometer(ah); + u8 therm_on = (thermometer < 0) ? 0 : 1; + + REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_RXTX4, + AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, therm_on); + if (ah->caps.tx_chainmask & BIT(1)) + REG_RMW_FIELD(ah, AR_PHY_65NM_CH1_RXTX4, + AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, therm_on); + if (ah->caps.tx_chainmask & BIT(2)) + REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, + AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, therm_on); + + therm_on = (thermometer < 0) ? 0 : (thermometer == 0); + REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_RXTX4, + AR_PHY_65NM_CH0_RXTX4_THERM_ON, therm_on); + if (ah->caps.tx_chainmask & BIT(1)) { + therm_on = (thermometer < 0) ? 0 : (thermometer == 1); + REG_RMW_FIELD(ah, AR_PHY_65NM_CH1_RXTX4, + AR_PHY_65NM_CH0_RXTX4_THERM_ON, therm_on); + } + if (ah->caps.tx_chainmask & BIT(2)) { + therm_on = (thermometer < 0) ? 0 : (thermometer == 2); + REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, + AR_PHY_65NM_CH0_RXTX4_THERM_ON, therm_on); + } +} + static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah, struct ath9k_channel *chan) { @@ -3962,6 +4000,7 @@ static void ath9k_hw_ar9300_set_board_va if (AR_SREV_9485(ah) || AR_SREV_9330(ah) || AR_SREV_9340(ah)) ar9003_hw_apply_tuning_caps(ah); ar9003_hw_txend_to_xpa_off_apply(ah, chan->channel); + ar9003_hw_thermometer_apply(ah); } static void ath9k_hw_ar9300_set_addac(struct ath_hw *ah, --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -873,6 +873,8 @@ #define AR_PHY_65NM_CH0_RXTX4_THERM_ON 0x10000000 #define AR_PHY_65NM_CH0_RXTX4_THERM_ON_S 28 +#define AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR 0x20000000 +#define AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR_S 29 /* * Channel 1 Register Map