From f6446b38add0a6520d70bf776603c4c83a175392 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 14 Sep 2012 12:36:02 +0530 Subject: [PATCH 244/245] ath9k: fill led_pin before drv_start Ensure that led pin is filled and set to OFF before starting the driver. With recent changes, drv_start is being called even before led_init is being completed. This is causing led is always OFF on driver load when the interface is UP. This patch splits the led init and fills the led pin before register hw. Signed-off-by: Rajkumar Manoharan --- drivers/net/wireless/ath/ath9k/ath9k.h | 4 +++ drivers/net/wireless/ath/ath9k/gpio.c | 45 ++++++++++++++++++++-------------- drivers/net/wireless/ath/ath9k/init.c | 1 + 3 files changed, 31 insertions(+), 19 deletions(-) --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -528,6 +528,7 @@ static inline void ath9k_btcoex_stop_gen #ifdef CONFIG_MAC80211_LEDS void ath_init_leds(struct ath_softc *sc); void ath_deinit_leds(struct ath_softc *sc); +void ath_fill_led_pin(struct ath_softc *sc); #else static inline void ath_init_leds(struct ath_softc *sc) { @@ -536,6 +537,9 @@ static inline void ath_init_leds(struct static inline void ath_deinit_leds(struct ath_softc *sc) { } +static inline void ath_fill_led_pin(struct ath_softc *sc) +{ +} #endif /*******************************/ --- a/drivers/net/wireless/ath/ath9k/gpio.c +++ b/drivers/net/wireless/ath/ath9k/gpio.c @@ -44,25 +44,6 @@ void ath_init_leds(struct ath_softc *sc) if (AR_SREV_9100(sc->sc_ah)) return; - if (sc->sc_ah->led_pin < 0) { - if (AR_SREV_9287(sc->sc_ah)) - sc->sc_ah->led_pin = ATH_LED_PIN_9287; - else if (AR_SREV_9485(sc->sc_ah)) - sc->sc_ah->led_pin = ATH_LED_PIN_9485; - else if (AR_SREV_9300(sc->sc_ah)) - sc->sc_ah->led_pin = ATH_LED_PIN_9300; - else if (AR_SREV_9462(sc->sc_ah)) - sc->sc_ah->led_pin = ATH_LED_PIN_9462; - else - sc->sc_ah->led_pin = ATH_LED_PIN_DEF; - } - - /* Configure gpio 1 for output */ - ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin, - AR_GPIO_OUTPUT_MUX_AS_OUTPUT); - /* LED off, active low */ - ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1); - if (!led_blink) sc->led_cdev.default_trigger = ieee80211_get_radio_led_name(sc->hw); @@ -78,6 +59,32 @@ void ath_init_leds(struct ath_softc *sc) sc->led_registered = true; } + +void ath_fill_led_pin(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + + if (AR_SREV_9100(ah) || (ah->led_pin >= 0)) + return; + + if (AR_SREV_9287(ah)) + ah->led_pin = ATH_LED_PIN_9287; + else if (AR_SREV_9485(sc->sc_ah)) + ah->led_pin = ATH_LED_PIN_9485; + else if (AR_SREV_9300(sc->sc_ah)) + ah->led_pin = ATH_LED_PIN_9300; + else if (AR_SREV_9462(sc->sc_ah)) + ah->led_pin = ATH_LED_PIN_9462; + else + ah->led_pin = ATH_LED_PIN_DEF; + + /* Configure gpio 1 for output */ + ath9k_hw_cfg_output(ah, ah->led_pin, AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + + /* LED off, active low */ + ath9k_hw_set_gpio(ah, ah->led_pin, 1); +} + #endif /*******************/ --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -598,6 +598,7 @@ static int ath9k_init_softc(u16 devid, s ath9k_cmn_init_crypto(sc->sc_ah); ath9k_init_misc(sc); + ath_fill_led_pin(sc); if (common->bus_ops->aspm_init) common->bus_ops->aspm_init(common);